搜索

Previous Next Back

Welding machine overload protection PTC Thermistor

Welding machine overload protection PTC Thermistor

PRODUCT DETAILS

Model Number:MZ31 series15P,16P,19P type

Function:PTC Thermistor Special for over current,overload protection of welding machines.

Technical parameters of Welding machine overload protection PTC Thermistor:

16P nominal R25 resistance: conventional 6 Ω, also 3.7 Ω, 5 Ω, 7 Ω, 10 Ω, 12 Ω, 15 Ω

15P, 19P nominal resistance: Conventional 15P 101R-100Ω, 19P 101R-100Ω,also 39 Ω, 50 Ω, 120 Ω

Allow R25 resistance deviation: 100 Ω ± 30%, others: ± 25 %

Rated power: 0.5 W

The above three models are all used for overcurrent overload protection of welding machines, 

just different welding machine size use different PTC thermistor Model.

Brief Introduction:

MZ31 series 15P,16P,19P PTC thermistor are million- time safety thermistor of automatic circuit protection,recoverability, using repeatedly, and no trigger, 

noise or protective component that could protect and restore from abnormal temperature and current automatically,which called "auto restore fuse" 

and "ten-thousand-time fuse".Recoverability, using repeatedly, and no trigger, noise or sparks. 

Working principle:

When the circuit is in normal state, the current passing through the PTC thermistor is less than the rated current, 

and the PTC thermistor is normal and the resistance is small.Does not affect the normal operation of the protected circuit. 

When the circuit fails and the current greatly exceeds the rated current, the PTC thermistor suddenly heats up and is in a high resistance state.

The circuit is disconnected to protect the circuit from damage. When the failure is eliminated, the PTC thermistor automatically returns to a low resistance state and the circuit returns to normal operation.

Advantages:

1.Automatic circuit protection,can resume steadily, 

2.contactless,noiseless and flameless,

3.reacts fast,

4. with a better performance of overvoltage protection,

5.wide operating voltage range,

6.small steady resistance,

7.low rated current,

8.small resistance,small size,

9.stable for a long time, 

10.no need to be reset supply after overload protection,

11.wide operating temperature range,

0 ~ +60°C (V=Vmax), 

-25 ~ +125°C (V=0), 

12.RoHS compliant. 

Special PTC Thermistor for Welding machine overload protection Appearance and Dimension(In: mm)

15P Thermistor: 

finished product diameter 15.5-16 .0 mm, mold size is 16mm. 

Foot distance is 7.5 ± 0.5 mm. 

Foot length: the length of the cut foot is 5mm.

16P Thermistor: 

finished product diameter 17-17 .5 mm, mold size is 20 mm. 

Foot distance is 5 ± 0.5 mm. 

Foot length: the length of the cut foot is 8mm.

19P Thermistor:

finished product diameter 17.5-18 .0 mm, mold size is 20mm. 

Foot distance is 7.5 ± 0.5 mm. 

Foot length: the length of the cut foot is 6mm.

16P is thinner than 15P and 19P is thicker than 15P and 16P.

Welding machine overload protection PTC Thermistor
Welding machine overload protection PTC Thermistor
Long press to look detail
Long by picture save/share
INQUIRY

enquiry form:

  • Please enter the verification code

enquiry content:


You have no items to require

Add Successfully

WeChat sweep

contact us

COPYRIGHT (©) 2018 SHENZHEN DXM TECHNOLOGY CO., LTD.

Technical Support : NetEase enterprise mailbox  163 mailbox

TEL:86 136 3150 3246      E-MAIL:info@dxmht.com

添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了